Zest-itⓇ Airbrush Reviver (for Acrylic and water based media)

Zest-it Acrylic Brush Reivier group picture

Use the Zest-it Airbrush Reviver to bath or soak your Airbrush to
remove all dried on ink or paint.

In a suitable container, use enough Zest-it Airbrush Reviver to cover
your disassembled airbrush and leave to soak. Usually 10+ minutes
soak will remove most dried residue.
Be aware this fluid can make the parts slippery so be careful when
handling. Rinse with water before re-assembly.

Wear Nitrile gloves if skin is sensitive and use eye protection
if splashes are likely.

Suitable for Acrylic based inks and paints.

Available sizes - 125 ml up to 1 Litre.e

Zest-it Acrylic Brush Cleaner and Reviver in use

Qualities

Removes dried on/stiff Acrylic paint
or ink from Airbrushes
• Soak Airbrush for a thorough
cleaning
Reusable and water rinseable
Low evaporative loss
Made in the UK
Pleasant citrus smell
Long lasting
Kind to Airbrushes
Contains no Aromatics
Contains no CFC’s
Low VOC’s
Kinder to the environment
Minimum 5 Year shelf life

Copyright1999 - 2016 © J. & T. Blackman Ltd. All Rights Reserved.
The information contained herein is the Intellectual Property of Jacqui Blackman and
J. & T. Blackman Ltd., and is supplied without liability for errors or omissions.
No part may be reproduced or used except as authorized by contract or other written permission, unless stated otherwise. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied.

Zest-it ® is a registered Trademark.